Home made shoe lasts

I’ve looked at buying shoe lasts many times, but always felt that they may not fit my feet terribly well. Made to measure is such a good way to go, but probably costs more.

The first thing I did was order some alginate. This is the stuff that dentists use to make moulds. It is quick setting and seemed to be just the ticket. I had no idea how much I needed so ordered three bags, thinking I might have enough left for Mark (I didn’t!).

The next thing is to get two boxes that fit my feet with an inch spare all round. If you live in Australia and are doing this, may I suggest going to Bunnings and trying on boxes? So much fun and the looks you get are so worth it! No photos of that escapade!

One of my boxes fitted perfectly but the second one was too long, so Mark did a little modification. May I say at this point that, as in most things, I could not have done this without my husband’s help.

IMG_5805

Mark painted the inside of the boxes so that they wouldn’t absorb the liquid from the alginate. Plastic wrap or plastic bags would probably work well too.

The feet had to be coated in vaseline and I enjoyed this stage very much. I though I was being clever by putting plugs between my big toes and the next toe so I could have a gap in my last. Didn’t quite work as I planned, but a bit of carving, and the end result was satisfactory.IMG_5808

This is the first bag of alginate. It went all lumpy. It sets really fast and should not look like this.

IMG_5812

It should look smooth like this one.IMG_5813

Mark got out the big guns for mixing!

IMG_5815

and it’s beautifully smooth. But we had air bubbles, which shouldn’t happen.

IMG_5820

I only had to stand for about three minutes before it was set.

See the air bubbles? Caused by the mixing process. I’m not sure how you could mix a whole bag without getting air bubbles though. IMG_5821

And we have a pair of moulds!

IMG_5823

Back to Bunnings for plaster of Paris, which again got mixed with the big mixer and then poured into the moulds. IMG_5826

Here they are sitting in the sun in our back lane for a preliminary set. We then moved them to a warm spot for 24 hours. IMG_5828

The moment I had waited so impatiently for. I was trying not to get my hopes up as I am mentally permanently scarred from trying to make a body double, and I didn’t want it to end the same way. IMG_5844

So far, so pretty good.IMG_5848

I have a foot. The air bubbles have caused holes in the plaster, but that doesn’t matter at all.

IMG_5850

A pair of misshapen feet – years of wearing high heels shows clearly. As does every wrinkle and vein, which is all very confronting! Please note that I have a gap between my toes for thong style shoes, the plaster had to be scraped out. IMG_5855

Here are the halves of the two moulds. We thought we would keep them but they shrivelled as they dried and then went mouldy, so they went in the bin. IMG_5856

And here they are! My feet in all their glory.

IMG_5858

Mark loves them and having made a pair of shoes with them, I can attest that they work perfectly. The toe piece looks like its in slightly in the wrong piece and that’s exactly what’s happened. I followed the pattern instead of checking the position on my own feet, however, it moved into a better position as I wore the shoes.

IMG_7365

This is the Atelier Louise Silver Sands Sandal, which I really like.

il_fullxfull.1851901103_hoq6

Katherine and I showing our finished sandals.

IMG_6965

I decided that I really needed a denim pair, so I wrangled the pattern pieces from the scraps from some jeans that I’d made my denim wreath from.

IMG_1960

I haven’t worn these for any distance yet and don’t want to get them grubby by wearing them around in the bush, but first impressions are that they will be really useful.

I have more planned so stay tuned!

Fadanista

31 thoughts on “Home made shoe lasts

    1. Thank you Suzy. The moulds are still a bit wet, but quite solid (like jelly) when the feet come out and it sort of stretches as the foot comes out. Vaseline really helps too.

      Like

  1. Your sandals are terrific! Thanks for the step-by-step pictures; I don’t know whether I’ll ever be this adventurous, but if so, I know where to look for guidance. Thanks for your blog….I really enjoy it.

    Like

    1. Thank you so much Cate. You don’t really need your own feet to make these sandals. It’s quite difficult finding the soling etc, here in Australia, but now I’ve sourced all the bits there will be no stopping me and they are reasonably cheap to make.

      Like

  2. What a wonderful project. I love reading about your crafting adventures and what would we do without our partners? Love the outcome and look forward to seeing more.

    Like

  3. Have so enjoyed reconnecting over on IG, and now here. As far as I know, there’s nowhere close for me to try this over here, but I’m eager for the opportunity. Someday! Are there options for making arch-supporting sandals and shoes, do you know? Sending you both hugs, del

    Like

    1. Thank you! I’ve been thinking about this. If you had some old orthotics you could make lined inner soles and capture the orthotic in between the sole and the lining. It might work? Sending you hugs too in this difficult time Del.

      Liked by 1 person

  4. WOW! This would never have occurerd to me, but they’re awesome! What a cool ‘tool’ to display when not being used, too! 😀

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s